9
Split Type User Manual
EN
7 .3
Advice on how to use the Remote Controller
Follow the recommendations below as to how to use the
remote controller:
- Ensure you always point the remote controller directly
at the indoor unit.
- Keep the distance between the transmitter and the
receiver within 7 m.
- Avoid obstacles between the transmitter and the
receiver.
- If experiencing difficulties with the remote control
communicating with the indoor unit, reduce the
distance between the remote controller and the indoor
unit.
- Do not drop, throw or strike the remote controller.
7 .3 .1 Remote Controller Lock
In order to lock the buttons and display of the remote
controller device:
• Press the LIGHT / LOCK button for over two seconds.
The rest of the buttons are deactivated.
The lock status indicator appears.
In order to deactivate the lock:
• Press the LIGHT / LOCK button again.
The rest of the buttons are activated.
The lock status indicator disappears.
7 .3 .2 LIGHT function
Press the LIGHT / LOCK button for less than 2 seconds
to light the display of the Indoor Unit. To switch the
display back off, press the LIGHT / LOCK button for less
than 2 seconds once again.
7 .4 Turning the unit on and off
In order to turn the unit on:
• Press the ON button on the indoor unit or on the
remote controller; the unit will start to operate.
In order to turn the unit off:
• Press the OFF button on the indoor unit or on the
remote controller; the unit will stop:Turning the unit on
and off.
7 .5 Selection of the Operation Mode
7 .5 .1 Automatic Mode (AUTO)
In automatic mode (AUTO) the air conditioning unit
automatically selects the cooling (COOL) or heating
(HEAT) mode in accordance with the actual ambient
temperature.
Fig . 7 .3 Automatic mode selection .
Legend
1 MODE button
2 AUTO mode indicator
3 TEMP / TIME button
In order to activate:
With the unit connected (see section 7.4):
• Press the MODE button.
The different operation modes are displayed.
Fig . 7 .4 Operation modes .
• Select the automatic operation mode (AUTO).
• Press the TEMP / TIME buttons to select the
temperature setting.
When pressing the TEMP / TIME buttons, the
temperature configuration will increase or decrease by
1ºC.
Operating Instructions 7
