16
Split Type User Manual
7 .7 .3 TIMER ON/OFF Function (CONNECTION/
DISCONNECTION USING TIMER)
The unit can be switched on and off using the timer.
Fig . 7 .23 Selection of TIMER function .
Legend
1 TIMER button
2 TIMER ON/OFF function indicator
3 TEMP / TIME buttons (increase/decrease)
4 REPEAT button
5 REPEAT function indicator
In order to program the switching on of the unit:
• With the unit switched off, press the TIMER button.
The TIMER ON indicator starts to blink. Set the desired
starting time of the unit by pressing the TEMP / TIME
buttons. Wait until the TIMER ON indicator stops
blinking.
In order to program the switching off of the unit:
• With the unit switched on, press the TIMER button
twice. The TIMER OFF indicator starts to blink. Set the
desired disconnection time of the unit by pressing the
TEMP / TIME buttons. Wait until the TIMER OFF
indicator stops blinking.
• In order to program an on or off time (or vice versa)
of the unit, carry out the previous steps successively.
When pressing the TEMP / TIME buttons, the time
configuration will increase or decrease by 10 minutes.
If the TEMP / TIME buttons are kept pressed, the time
will increase or decrease rapidly.
The time can be set within an interval of 24 hours.
In order to cancel:
• Press the DEL button.
Note!
Correctly set the clock before operating the
timer.
Note!
Since the timer configuration can only be set at
10 minutes intervals, both the start and stop of
the unit may suffer an up to 9 minutes delay
depending on the clock setting.
Note!
Restart the time configuration after replacing
the batteries or after a possible power failure.
Note!
REPEAT FUNCTION:
The unit has a memory function. Press the
REPEAT button every time you wish to repeat
the previous timer programming. In order for the
unit to receive the Repeat signal so that the
programming can be repeated, the remote
control must be placed in front of the unit, no
further than five meters away.
Warning!
In order for the unit to receive the commands
properly, the remote control must be directly
pointing at it, with no obstacles between them
whatsoever.
7 Operating Instructions