2 Notes on the documentation
6
Installation and maintenance instructions atmoMAG 0020273765_00
2
Notes on the documentation
2.1
Observing other applicable documents
▶
You must observe all the operating and installation in-
structions included with the system components.
2.2
Storing documents
▶
Pass these instructions and all other applicable docu-
ments on to the system operator.
2.3
Validity of the instructions
These instructions apply only to:
–
MAG mini 114/1 I(P-INT): 0010022619
3
Product description
3.1
Information on the data plate
The data plate is mounted at the front of the down-draught
diverter, under the product casing, at the factory.
Applicability:
Germany
OR Austria
Information on the
data plate
Meaning
MAG
Product category
11/14
Power in l/min
-4/1
Chimney connection/product generation
I
With electrical ignition and battery
atmoMAG
Product series
Type B11 BS
Approved unit type
Cat I
Single-gas unit
3P
Gas boiler category
G31
Permitted gas types with connection
pressures
P
nom.
Maximum heat output
P
min.
Minimum heat output
Q
nom.
Maximum heat input
Q
min.
Minimum heat input
P
w max.
Maximum permissible water pressure
Serial number
7th to 16th digit = product article number
3.2
Product design
6
7
8
9
11
10
12
13
1
2
4
5
3
1
Down-draught diverter
2
Flue gas sensor
3
Safety cut-out
4
Heat exchanger
5
Burner
6
Flow rate se-
lector/temperature
selector
7
Gas valve assembly
8
Rotary power switch
9
Main switch
10
Battery compartment
(not visible)
11
Electronics box
12
Ignition electrode
13
Monitoring electrode
3.3
CE label
The CE label shows that the products comply with the basic
requirements of the applicable directives as stated on the
identification plate.
The declaration of conformity can be viewed at the manufac-
turer's site.
4
Set-up
4.1
Checking the scope of delivery
1.
Remove the product from its box.
2.
Check that the scope of delivery is complete and intact.
4.1.1
Scope of delivery
Num-
ber
Designation
1
Gas-fired instantaneous water heater
1
Connection accessories that are included
1
Enclosed documentation
