Installation manual neutralisation device without feed pump 0020134552_00
5
a
Safety instructions and regulations
a
2
2.3
Basic safety instructions
Installation, maintenance and repair
The unit must only be installed by a suitably qualified com-
petent person. The existing regulations, rules and guidelines
must be observed when doing so.
Inspection/maintenance and repairs must also be carried
out by this competent person.
Risk of death from electric shock!
There is a risk of electric shock when opening the gas-fired
high-efficiency boiler.
>
Before opening the cover, switch off the gas-fired high-
efficiency boiler (mains switch and fuse).
Risk of injury due to neutralisation medium and
condensed water!
The condensed water from the gas-fired high-efficiency
boiler and the neutralisation medium pose a risk to the
eyes if they come into contact with them.
>
Avoid condensed water coming into contact with the
eyes.
>
Avoid neutralisation medium coming into contact with
the eyes.
>
If your eyes do come into contact with condensed water
or neutralisation medium, rinse your eyes thoroughly
with clean water.
>
Ensure that the neutralisation device is only operated
out of the reach of children.
Material damage!
Improper use of tools or unsuitable tools may cause
damage.
>
To tighten or loosen threaded connections, only use a
suitable open-ended spanner (combination wrench) – do
not use pipe wrenches, extensions, etc.
2.4
Regulations and standards
>
Ensure that the neutralisation device is installed in
accordance with the safety regulations and all other rele-
vant state or local regulations.
