11
Connect the
Touch Panel cable to the touch screen
,
the other side to the ”TO TOUCH” INPUT of the SUB BOARD
module
, and then you will be able to assemble again the screen on its original position.
The next step will be
the image bridge between the SUB BOARD module and the HSD connection behind of the
radio. Disconnect the Purple Original LCD cable HSD
of the radio and connect it to the SUB BOARD module “TO
MONITOR” connection port
.
The “TO SYS” cable must be connected to the connector that we leaved free
previously
(see it on the image).
Then, connect the
LVDS cable
(*1ea) to the
“FROM I/F” connection port of the additional module (SUB BOARD)
and connect the other side to the multimedia interface LVDS OUT
.
