23
Push
MENU
button of the remote control until the advanced menu settings of the multimedia interface disappears
from the screen.
Remember to do again a touch calibration after adjusting the screen’s image.
Now you can insert the
maps SD Card
to the GSP Box.
3.2.
RESET:
If you
RESET
the GPS Box or the multimedia interface, repeat again the steps from the
chapter 3.1
, maybe, when you
perform a
RESET
on it, the language of the GPS Box could be changed, follow the next steps to config. it again to your
desired language:
Make a touch calibration of the GPS Box following the steps described before, now push the
“Settings”
button, then
push the
“Usual Setup”
button and select the language that you prefer.
NOTE:
If you change the position of the
RGB to AV Switch from the GPS Box
(in
RGB
default position)
it will
RESET,
then follow the steps described before to adjust the system again.
