14
01.03.2017
STR 300S
1e.
Basic Settings Sequence control
With the sequence control active the whole seed drill does not need to be up on the headland before lifting
and when it is lowered the front tool will be lowered first, followed by the seed coulter.
Option to deactivate seed coulters and
front tool so that they stop upon lowering.
- Time from the front tool leaving the low-lift posi-
tion until the drilling unit begins to be lowered.
- Time from the front tool leaving the working
depth until the drilling unit begins to be raised.
- Distance from the front tool leaving the low-lift
position until the drilling unit begins to be low-
ered.
- Distance from the front tool leaving the working
depth until the drilling unit begins to be raised.
Both time and distance are used, and it is the one that is first reached that activates the sequence.
For example, if you reverse out into a corner in order to begin stagnant sowing, it is therefore time that starts the
sequence.
For the above setting it would therefore be:
The drilling unit begins to be lowered 0.5 m
or 0.5 seconds after lowering commences.
When lowering
When raising
The drilling unit begins to be raised 1 m or
1 second after raising commences.
