10
01.03.2017
STR 300S
1. Setup
Press Setup to access:
a. Calibration of delivered seed
b. Calibration of radar
c. Basic Settings Front Tools
d. Basic Settings Drilling Unit
e. Basic Settings Sequence Control
See the instruction manual for general settings:
General (Machine basic settings)
Tramlining.
Alarm settings
Basic settings of coulter pressure.
If you access any of the calibration menus, a pop up will appear:
NOTE:
Feed output stops if you access any of the calibration menus!
Select Yes.
A number of things need to be considered before commencing the calibration:
Refer to Attachment 1 for Calibration and setting of sowing depth.
• Which seed box roller is suitable for the crop that is to be sewn (Refer to the calibration table)?
Spirit R i supplied with three different rollers for the seed feed housing as standard:
Grain roller 400 cc (e.g. wheat, etc.) , grass roller 120 cc (grassland, flaxseed, etc.) and an oil plant roller
(rape, etc.).
NOTE:
When changing roller: Clean the seed feed housing internally where the roller is to sit and external-
ly around the flange at the motor so that the new roller can be properly installed!
Grain roller 400 cm³
Rapeseed roller 18 cm³
Grass roller 120 cm³
1a.
Calibration of delivered seed
• Is the low level sensor in the correct position?
• Refer to Attachment 1 for other sowing settings.
Special rollers can also be purchased for the machine.
