WallVIEW PRO Z700 Installation and User Guide 341-674 Rev. B
Page 10 of 12
FCC, ICES-003 Compliance and CE Declaration of Conformity
FCC Part 15 Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his/her own expense.
Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This
device must accept any interference including interference that may cause undesired operation of the device.
Changes or modifications not expressly approved by Vaddio can affect emission compliance and could void
the user’s authority to operate this equipment.
ICES-003 Compliance
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set
out in the Radio Interference Regulations of the Canadian Department of Communications.
Le présent appareil numérique n’emet pas de bruits radioélectriques dépassant les limites applicables aux
appareils numeriques de la classe A préscrites dans le Règlement sur le brouillage radioélectrique édicte par
le ministère des Communications du Canada.
European Compliance
This product has been evaluated for Electromagnetic Compatibility under the standards for Emissions and
Immunity and meets the requirements for E4 environment. This product complies with Class A (E4
environment). In a domestic environment this product may cause radio interference in which case the user
may be required to take adequate measures.
Standard(s) To Which Conformity Is Declared:
EMC Directive
89/336/EEC
EN 55022A
Conducted and Radiated Emissions
EN 55024
Electromagnetic Compatibility - Immunity
EN 61000-4-2
Electrostatic Discharge Requirements
EN 61000-4-3
Radiated Electromagnetic Field Requirement
EN 61000-4-4
Electrical Fast Transients / Burst Requirements
EN 61000-4-5
Surge Requirements
EN 61000-4-6
Conducted Immunity Requirements
EN 61000-4-8
Power Frequency Magnetic Field Requirements
EN 61000-4-11
Voltage Dips, Interrupts and Fluctuations Requirements
