Web Tasks for All Users: Camera Control
The Camera Control page provides most of the same controls as the IR Remote Commander, along with
some that are not available from the remote:
n
Put the camera in standby or bring it back to the ready state
n
Pan, tilt, zoom, or return to "home" position"
n
Set speeds for camera movements
n
Focus manually or select auto-focus
n
Set the camera for normal or inverted operation
n
Set or move to camera presets
n
Select one of the stored lighting adjustments
Since the web interface is specific to the camera you are working with, it does not offer camera selection.
Manage camera ready state
Use the Standby button to switch between low-power (standby) and ready states.
In standby mode, the button is red and the screen presents the message “Device is in standby.” On
entering standby mode, the camera pans 90° from center and 30° downward. Ceiling-mounted cameras
also point downward in standby mode; this keeps dust from collecting on the lens.
17
Integrator's Complete Guide for RoboSHOT HD-SDI PTZ Cameras