AutoTrak 2.0 Camera Tracking System
AutoTrak 2.0 Camera Tracking System - Document Number 342-0382 Rev. E Page 28 of 52
All Menu Screen Shots and Control Descriptions (continued):
Tuning: Algorithm
Control
Action
Description
Luminance Threshold
Click Up/Down
Minimum illumination to be considered a valid target (1-255)
Max Luminance Density
Slider Left/Right
Max luminance points to be considered a valid target (1-9999)
Top Image Area Ignored
Click Up/Down
Number of lines from the top of the image the IR reference camera
will ignore. Used when there are other IR emitters in the upper part
of the camera’s view, to improve camera tracking. (Range 0-45%,
Default = 0%)
Bot Image Area Ignored
Click Up/Down
Number of lines from the bottom of the image the IR reference
camera will ignore. Used when there are other IR emitters in the
lower part of the camera’s view, to improve camera tracking. .
(Range 0-45%, Default = 0%)
Search Left Limit
Click Up/Down
The Left most location, in degrees, to search for target.
Search Right Limit
Click Up/Down
The Right most location, in degrees, to search for target.
Move Left Limit
Click Up/Down
The Left most location, in degrees, camera can move.
Move Right Limit
Click Up/Down
The Right most location, in degrees, camera can move.
Search Pan Speed
Click Up/Down
Pan search speed and max tracking camera speed
Search Tilt Position
Click Up/Down
Reference camera tilt angle, in degrees
Projection Time
Click Up/Down
Tracking speed adjustment where higher value reduces speed.
Window Width
Click Up/Down
Wider Window Width reduces left-right movement. Narrow Window
Width increases the left-right movement of the camera
Window Height
Click Up/Down
Greater window height reduces up-down movement. Narrow window
height increases up-down movement of the camera. (Range 1-60%,
Default = 20%)
Max Blind Time
Click Up/Down
Time, in sec, to wait after target loss to begin target re-acquisition
Max. Reacquisition Time
Click Up/Down
Time, in sec, to search for target before going into standby mode.
Load
Button
Click/Press
Load all tuning setting
Save
Button
Click/Press
Save all tuning setting
Pause/Resume
Button
Click/Press
Pause or Return to Tracking
Shutdown
Button
Click/Press
Close/Shutdown system
