Squiggle Video Whiteboard Kit
Squiggle Manual 342-0172 Rev. B
Page 5 of 16
Squiggle Quick-Connect Interface Front Panel (left to right):
1) USB Drive Port:
The USB port on the front panel allows the user to plug in any standard FAT32 or Fat16
USB drive to store content written on the whiteboard. Simply press the One-TOUCH Image Save icon on the
Digital Control Panel (see previous page) and the content written on the whiteboard will be saved to the USB
drive. A confirmation of the saved content will be displayed on the video output. All information is saved as a
1280 x 720 JPEG image.
2) Power Indicator / System Reset Button:
When the Quick-Connect is turned on, the POWER indicator light
illuminates. It is not a power switch. This button also serves as a SYSTEM RESET button. Pressing the
button will reset the system from boot up.
Rear Panel Connections and Controls (Left to Right):
1) Power Supply Input:
12VDC, 3.0 Amp power supply on a 5.5mm OD x 2.5mm ID connector.
2) Whiteboard
RJ-45:
Power and data transmitted to and from the video whiteboard via Cat. 5e cabling.
3) Ethernet on RJ-45:
Ethernet port is reserved for future use and not active at this time.
4) Settings:
The Quick-Connect has a 5-position dip switch for setting HD or SD resolution, refresh rate,
test bars and switches available for future settings.
5) Video Outputs:
Three video outputs; DVI-D, YPbPr HD and CVBS (composite), are available on the
Squiggle Quick-Connect Interface.
•
The DVI-D and YPbPr outputs are simultaneous outputs and are at a resolution of 720p/59.94 or
720p/50 which allows the Squiggle Board to be connected to a variety of video devices such as
Vaddio switchers/mixers, videoconferencing codecs, monitors and other third-party video devices.
•
The SD video can be chosen instead of the HD DVI-D and YPbPr outputs and output SD resolutions
of 480i/NTSC and 576i/PAL.
NOTE:
If the SD composite video output is chosen instead of the HD outputs, a dip switch setting is
changed to allow the SD output to be active. The HD outputs are not active when the SD video is
chosen with the dip switch. Conversely, the SD video out is not active when the HD video is chosen.
Optional Accessories for Squiggle:
①
②
③ ④
②
①
⑤
Colored Digital Sleeves
(998-5440-030)
Whiteboard Cleaner
(998-5440-020)
Standard Whiteboard
Eraser
(998-5440-010)
Replacement Bullet
Tip Markers
(998-5440-040)
