page 50 of 57
Notes on return to the factory
Repair - return - DAkkS calibration
Safety and health of our staff, laws and regulations re-
garding the handling of dangerous goods, occupational
health and safety regulations and regulations regarding
safe disposal of waste require that for all pumps and oth-
er products, the
“Health and safety clearance form“
,
see pg. 54
, must be sent to our office fully completed and
signed before any equipment is shipped to the authorized
service center.
Fax or mail a completed copy of the health and safety
clearance form to us in advance. The declaration must ar-
rive before the equipment.
Enclose a second completed
copy with the product
. If the equipment is contaminated,
you must notify the carrier.
No repair / DAkkS calibration is possible unless the
correctly completed form is returned. Inevitably, there
will be a delay in processing the equipment if informa-
tion is missing, or if this procedure is not followed.
If the product has come in contact with chemicals, radioac-
tive substances or other substances dangerous to health
or environment, the product must be decontaminated
pri-
or to sending it back to the service center
.
- Return the product to us disassembled and cleaned
and accompanied by a certificate verifying decontami
-
nation or
- Contact an industrial cleaning and
decontamination
service
directly or
- Authorize us to send the product to an industrial clean-
ing facility
at your expense
.
To expedite repair and to reduce costs, please enclose a
detailed description of the problem and the product’s op-
erating conditions with every product returned for repair.
NOTICE
