INTRODUCTION vacon
•
7
24-hour support: +358 (0)40 837 1150 • Email: [email protected]
3
2.
INTRODUCTION
The Vacon NXC is a product range of free standing enclosed frequency converters for the high power
range. The NXC is a modular product intended for use in all applications where reliability and high
availability is appreciated.
This manual gives the basic information required to successfully perform installation and basic
commissioning. Due to the high amount of options available, not all possible variations are described
in this manual. For more information, refer to delivery-specific documentation. This manual as-
sumes good competence in installation and commissioning skills.
In the All in One Application Manual you will find information about the different applications in-
cluded in the All in One Application Package. Should these applications not meet the requirements
of your process please contact the manufacturer for information on special applications.
Information on the installation of the drive in a cabinet can be found in the manual 'NXP Frequency
Converters, IP00 Module Installation, Frames FR10 to FR14 (ud00908).
This manual is available in both paper and electronic editions. We recommend you to use the elec-
tronic version if possible. If you have the electronic version at your disposal you will be able to
benefit from the following features:
The manual contains several links and cross-references to other locations in the manual which
makes it easier for the reader to move around in the manual, to check and find things faster.
The manual also contains hyperlinks to web pages. To visit these web pages through the links you
must have an internet browser installed on your computer.
In case you are in doubt about your ability to perform installation or commissioning,
do not proceed. Contact your local Vacon partner for advice.
WARNING
