![Vacon NXP/C 5 Series User Manual Download Page 19](http://html1.mh-extra.com/html/vacon/nxp-c-5-series/nxp-c-5-series_user-manual_847738019.webp)
18 • vacon
MOUNTING
Tel. +358 (0)201 2121 • Fax +358 (0)201 212 205
5
5.2
Lifting the unit out of the transport packaging
The unit is delivered either in a wooden box or a wooden cage. The box may be transported either
horizontally or vertically, while transportation of the cage in a horizontal position is not allowed. To
lift the unit out of the box, use lifting equipment capable of handling the weight of the cabinet.
There are lifting lugs on the top of the cabinet and these lugs can be used to lift the cabinet into an
upright position and to move it to the place needed.
Figure 5-2. Lifting the unit
Recycle the packaging material according to local regulations.
5.3
Fixing the unit to the floor or to the wall
The cabinet should always be fixed to the floor or to the wall. Depending on installation conditions,
the cabinet sections can be fixed in different ways. There are holes in the front corners which can be
used for fixing. Additionally, the rails on the top of the cabinet have fixing lugs for fixing the cabinet
to the wall.
Welding of the cabinet might risk sensitive components in the converter.
Ensure that no grounding currents can flow through any part of the converter.
WARNING
Min 60°
Min 60°
Min 60°