RECEIPT OF DELIVERY
vacon • 9
24-hour support: +358 (0)40 837 1150 • Email: [email protected]
3
3.
RECEIPT OF DELIVERY
Vacon NX frequency converters have undergone scrupulous tests and quality checks at the factory
before they are delivered to the customer. However, after unpacking the product, check that no
signs of transport damages are to be found on the product and that the delivery is complete (com-
pare the type designation of the product to the code below).
Should the drive have been damaged during the shipping, please contact primarily the cargo insur-
ance company or the carrier.
If the delivery does not correspond to your order, contact the supplier immediately.
In the small plastic bag included in the delivery you will find a silver
Drive modified
sticker. The
purpose of the sticker is to notify the service personnel about the modifications made in the fre-
quency converter. Attach the sticker to the equipment to avoid losing it. Should the frequency con-
verter be later modified (option board added, IP or EMC protection level changed), mark the change
in the sticker.
3.1
Type designation code
3.1.1
NX type designation
Figure 3-1. Vacon NXC type designation code
NXC
0000
A 3 L 0 SSG A1A20000C3
5
nk3_2.fh8
Product range: NXC
Nominal current (low overload)
e.g. 0460 = 460A etc.
Nominal mains voltage (3-phase):
5 = 380–500Vac, 6 = 525–690Vac
Enclosure class:
0 = IP00 (module only), 2 = IP21/Nema 1 (cabinet-mounted),
5 = IP54/Nema 12 (cabinet-mounted)
Control keypad:
A = standard (alpha-numeric)
B = no local control keypad
F = dummy keypad
G = graphic display
EMC emission level:
L = fulfils standard EN61800-3+A11, 2nd environment
restricted distribution
T = For IT networks
N = No EMC emission protection
Brake chopper
0 = No brake chopper, 1 = Equipped with brake chopper
Hardware modifications; Supply - Mounting - Boards
SSF = 6-pulse connection; air-cooled; standard board
SSG = 6-pulse connection; air-cooled; varnished board
TSF = 12-pulse connection; air-cooled; standard board
TSG = 12-pulse connection; air-cooled; varnished board
BSF = 6-pulse connection; Additional DC-connection; air-cooled;
standard board
BSG = 6-pulse connection; Additional DC-connection; air-cooled;
varnished board
Option boards; each slot is represented by two characters where:
A = basic I/O board, B = expander I/O board,
C = fieldbus board, D = special board
