control keypad
vacon • 91
24-hour support: +358-(0)40-
8371 150 • Email: [email protected]
7
Figure 7
-
19. HMI acknowledge timeout
Number of retries to receive HMI acknowledgement (P6.7.4)
With this parameter you can set the number of times the drive will try to receive acknowledgement if
it does not receive acknowledgement within the acknowledgement time (P6.7.3) or if the received
acknowledgement is faulty.
You can change value through the same procedure as for P6.7.3 (see above).
Note! Changes to P6.7.3 and P6.7.4 become effective after the next start-up.
7.3.6.8
System info
In the System info submenu (S6.8) you can find inverter-related hardware and software information.
You can enter the
System info submenu
. You can now browse the
Total counters
The
Total counters menu
(S6.8.1) contains information on the inverter operation times i.e. the total
number of MWh, operation days and operation hours. Unlike the counters in the Trip counters menu,
these counters cannot be reset.
Note! The Power On time counter (days and hours) runs always when the power is on.
Page
Counter
C6.8.10.1
.
MWh counter
C6.8.10.2
.
Operation day counter
C6.8.1.3.
Operation hour counter
Table 7
-
5. Counter pages
READY
I/O term
200ms
READY
I/O term
enter
200ms
HMI ACK timeout
HMI ACK timeout
Summary of Contents for NXI
Page 1: ...vacon nxi inverters fi9 fi14 user manual ...
Page 104: ......
