Vacon NXI, User Manual

Page: 62 / 105

62 • vacon control keypad
Tel: +358-201-2121 • Fax: +358-201-212 205
7
7.2 Keypad push-buttons
The Vacon alphanumeric control keypad has 9 push-buttons that are used for controlling the
inverter (and motor), setting parameters, and monitoring values.
Figure 7-2 Keypad push-buttons
7.2.1 Button descriptions
reset
= This button is used to reset active faults (see Chapter 7.3.3.4).
select
= This button is used to switch between the two latest displays. This may be
useful when you want to see how the changed new value influences some
other value.
enter
= The enter button is used for:
1) confirmation of selections
2) fault history reset (2…3 seconds)
= Browser button up
Browse the main menu and the pages of different submenus.
Edit values.
= Browser button down
Browse the main menu and the pages of different submenus.
Edit values.
= Menu button left
Move backward in menu.
Move cursor left ( in parameter menu ).
Exit edit mode.
Press for 2 to 3 seconds to return to main menu.