-15-
IMPORTANT:
The filters must dry completely before reuse.
4. There may be debris wrapped around the pre-filter. With the filters removed, remove
the pre-filter from the chamber and clean off any debris. Once complete, correctly
align the pre-filter back into the chamber (illustrated below).
2. To separate the top from the dust cup, hold the top of the dust cup and rotate
counterclockwise. Then lift the top and filter from the dust cup.
3. Brush loose debris from filters then rinse with warm water. Rinse and gently
squeeze dry the foam filter. Set both filters aside and allow to air dry for 24
hours.
Chamber
Pre-filter
Foam Filter
Non-woven Filter
Chamber
Pre-filter
Foam Filter
Non-woven Filter
