-17-
3. Simply lift the brush roll out of the nozzle housing. Clean off debris and
anything wrapped around the brush roll. Use a pair of scissors to remove
threads, etc.
4. Place the brush roll back into the housing by aligning the hexagon end into the
right end of the nozzle first. Then insert the other end into place and push the
tab to the right to lock the brush roll.
Cleaning the Motorized Nozzle & Blockages
The brush roll may accumulate debris such as strings, hair and fibers. This type of
debris can wrap around the brush and diminish its ability to clean effectively.
To Remove Brush Roll for Manual Cleaning:
1. Make sure the vacuum cleaner is turned off. Remove the wand and the hand
vacuum from the motorized nozzle and set aside.
2. Turn the nozzle over to access the brush roll. As shown below, push the tab on
the left hand side of the nozzle to the left. This will unlock the brush roll.
