VAC TZIDC, Configuration And Parameterization Instruction

Page: 9 / 40

TZIDC, TZIDC-200 | COI/TZIDC/TZIDC-200-EN 9
3 Con fi guration
3.1 General information
Most parameters for the position er can be set locally, meaning
that con
fi guration only needs to be performed via the local
communication interface (LCI) or FSK modem and PC in
exceptional cases.
You may also deny or restrict local modi fi cation and saving of
parameters by completely or partially blocking access to the
con
fi guration level (see Chapter "Inhibiting operation" on page
8 and the description of the Function parameter on page 30).
To simplify the process, the di ff erent parameters are grouped
as follows:
ID Designator Name
P1._ STANDARD Standard
P2._ SETPOINT Setpoint
P3._ ACTUATOR Actuator
P4._ MESSAGES Events
P5._ ALARMS Alarms
P6._ MAN_ADJ Manual adjustment
P7._ CTRL_PAR Control parameters
P8._ ANLG_OUT Analog output
P9._ DIG_OUT Digital output
P10._ DIG_IN Digital input
P11._ FS / IP Factory setting, I/P type
The following sections provide an overview (in tabular and
graphical format) of the overa ll structure of the parameter
groups and parameters.
Change from two to one column
3.2 Example
Parameter (1st line in
display) Indicator (2nd line in
display) Function Possible parameter settings Unit Factory Setting
P1._ STANDARD
P1.0 ACTUATOR Actuator type LINEAR, ROTARY - LINEAR
P1.1 AUTO_ADJ Autoadjust Command / Function is being
run
- -
P1.2 ADJ_MODE Automatic adjustment mode FULL, STROKE, CTRL, PAR,
ZERO_POS, LOCKED
- FULL
P1.3 TEST g n i e b s i n o it c n u F / d n a m m o C t s e T
run
- INACTIV
P1.4 EXIT Return to operating level Command / Function is being
run
- NV_SAVE
P2._ SETPOINT
conf