2
Please read and follow carefully.
-
Insert threaded ends of “T”s in bases and tighten.
-
Insert levers into bases.
-
Make sure levers are in the
OFF
position.
-
Ensure bases and vehicles are clean.
-
Press rack with double elastics on
flat area
of hood/bonnet on
passenger
side
.
Operate lever and remove it.
-
Place the other rack on a flat area of roof or windshield.
-
Attach rods with reels forward and loop elastics over bar ends.
-
Elastic tension can be adjusted using the teeth under the bar.
-
Check for security by pulling on the base, not the “T”.
-
Remove rods by inserting a finger in bar recess and sliding elastics over the
end.
-
To remove racks from vehicle, undo lever and pull the tab to break the
vacuum.
IMPORTANT NOTES
-
When not in use, fit the protective covers and keep the levers in the
OFF
position.
-
Loc Racs are designed for fishing rods only and should be removed after
use.
-
Not for use on ice covered vehicles. Wet vehicles – wipe off excess water.
-
Cars parked under trees, long term, can build up aphid deposits.
-
Protect your rods by not driving at high speed.
-
Keep one key as spare – it can be fitted to a key ring. Put some bright
string on the other key.
-
If you accidentally deform the bases, put them on a smooth clean surface
with the levers in
UP/OFF
position. (They will gradually return to their
shape at room temperature).