LCDPCW75 INSTALLATION INSTRUCTIONS Page 1 of 3
S t e p l
LCDPCW75
Wall Mount for LCD with PC & Keyboard Tray
Modified Wrench
for Tri-Groove Nuts
5/16-18 Tri-Groove Nut
2PI. 5/16" Belleville Washers
75mm VESA
Mounting Plate
5/16" Flat Washer
5/16-18x2" Socket
Pin Head Security Screw
3/16" Hex
Wrench with Hole
Steps 2-4
LCPCW75 Wall Arm
3PI. One-way
or Hex Head
Wood Lag Screws
Use long driver extension
through clearance hole—
* * ' &
Important! Please read all warnings and cautions before installing the mount.
Caution: Improper installation of this mount may void the warranty on your monitor or PC.
Caution: Installation should be performed by qualified installers only, using construction methods prescribed
by authorized architects or engineers that comply to all applicable codes and standards.
The maximum weight of monitor to be installed on the LCPCW75 is 20lbs (9.1 kg). The maximum weight of
PC to be installed on the LCPCW75 is lOlbs (4.5 kg)
Inspect all parts to make sure there is no shipping damage. Do not install if any parts are damaged.
1) Remove the 5/16-18 x 2" Pin Head Security Screw, 5/16-18 Tri-groove Nut
and 5/16" Washers from the 75mm VESA Mounting Plate and set aside for
later. Use the provided 3/16" Hex Wrench and Tri-groove Nut Wrench
2) Determine the best possible viewing location where there is a wood
stud located. Use the LCDPCW75 Wall Plate to mark the location of three
mounting holes in the desired location at the desired elevation. Double
check to make sure the LCD will have adequate clearance from the ceiling.
3) Drill three pilot holes into the wood stud with a 1 / 8 " drill bit 2-1 / 2 " deep
in the previously marked locations.
4) Attach the LCDPCW75 Wall Arm to the wall with the provided One-way
Security or Hex Head Lag Screws. If needed, use a driver extension for
installation of the bottom screw.
Assembly Hardware
I ... 5/16-18 x 2" Socket Security Screw (06-10011227)
I ... 5/16-18 Tri-groove Nut (06-400151618)
I
.... 5/16" Belleville Washers (06-32585160)
I ... 5/16" Flat Washers (06-31010517)
I ... 1 /4-20 x 1-1/2" Socket BH Screw (06-10825200)
I ... 1 / 4 " Belleville Washers (06-32581425)
I...
1/4" Flat Washers (06-30101316)
I ... 1/4-20 Nylock Nut (06-40252520)
I ... 1" Round Knob with 1/4-20 Insert
I ... 1 -1/2" Round Knob with 1 /4-20 x 1 -1 /4"Stud
I ... 1/4-20 Acorn Nut (06-42012520)
I . . . # 1 0 Washers (06-30110500)
I . . . # 1 0 Atom Nuts (06-42011024)
Installation Hardware Kit
# 1 4 x 2-1/2" HWH Lag Screws (06-10012500)
# 1 4 x 2-1/2" One-way Security Lag Screws (06-11211425)
4mm x 12mm Phillips Screws (06-12410412)
4mm x 12mm Pin Head Security Screws (06-10450532)
5mm Flat Washers (06-30150000)
l-TECH
COMPANY
Installation Tool Kit (Included with Mount)
1 ... Tri-groove Nut Wrench (modified T#271
with ground edges for clearance)
1 ... 3/16" Hex Wrench w/hole (10-06151875)
1 ... 5/32" Hex Wrench w/hole (10-06151565)
i-Tech C o m p a n y LLC
TOLL FREE: (888) 483-2418 • EMAIL:
i n f o @ i T e c h L C D . c o m
WEB:
