ENGLISH
34
INSTALLATION LAYOUT
MOTOR OVERRIDING SYSTEM
In case of absence of current, the gate can be released by
operating on the motor:
1.
Open the hatch of the lock
J
in front of the motor
2.
Insert the key
K
in the lock and turn clockwise to open the
hatch of the release on the side
3.
Insert the key
L
into the hole and turn clockwise until reached
the limit switch
To restore the automation, proceed as follows:
1.
turn the key
L
anticlockwise until reached the limit switch,
then draw it out
2.
turn the key
K
anticlockwise closing the hatch of the lock,
then draw it out
3.
Close the lock with the hatch
J
���
Power supply
cable 3 x 1,5 mm
2
(T100°C)
���
Blinker
cable 2 x 1,5 mm
2
���
External Aerial
cable RG-58
���
Digital or key selector
cable 3 x 0,5 mm
2
���
Internal Photocellules
cable 4 x 0,5 mm
2
(RX)
cable 2 x 0,5 mm
2
(TX)
���
External Photocellules
���
Safety edge (EN 12978)
-
Summary of Contents for FORTECO
Page 2: ......
