background image

1 Safety precautions

6

1.4 

Instructions for use

Before using for the first time

The appliance must be installed and
connected to the electricity supply in
accordance with the separate installa-
tion instructions. Have a qualified fitter/
electrician carry out the necessary
work.

Ensure access to the place of discon-
nection (e.g. socket outlet, wall switch,
fuse) and the water tap.

Correct use

The appliance is only suitable for drying
home textiles. It is designed for use in
the home and for the above-mentioned
purpose only. No liability is assumed for
any damage caused by improper or in-
correct use.

Any repairs, modifications or manipula-
tions to the appliance, especially any
electrically live parts, may only be car-
ried out by the manufacturer, its Cus-
tomer Services or a similarly qualified
person. Repairs if carried out incorrectly
could cause serious injury or damage
to the appliance and fittings as well as
affect the functioning of the appliance. If
the appliance is not working properly or
in case of a repair order, follow the in-
structions given in the «Service & Sup-
port» section. If necessary, please con-
tact our Customer Services.

Use original spare parts only.

Before closing the appliance door and
starting a programme, ensure that there
are no foreign objects or pets in the
drum.

Note on use

If the appliance is not operating prop-
erly, disconnect it from the power sup-
ply immediately.

To protect your washing, follow the fab-
ric care symbols and the hints and ad-
vice in the 'Drying tips' section.

Do not operate the appliance without a
door filter or with a damaged door filter.
Fluff can destroy the appliance!

Caution: Burns hazard!

Do not dry fabrics that contain traces of
hair spray, hair gel, nail varnish remover
or other similar substances. Danger of
gas build-up!

Caution: Risk to life!

Packaging material, e.g. plastic film and
polystyrene, can be dangerous for chil-
dren. Danger of suffocation! Keep pack-
aging material away from children.

How to avoid damaging the appliance

Transport the appliance in an upright
position only! Transporting it in any
other position will result in damage to
the appliance! When carried carefully
without being shaken, the appliance
may be tilted a maximum of 90° to the
left (viewed from the front).

Front

Front

Front

Back

Front,

upside down

Side

Close the appliance door carefully.

When cleaning the appliance make
sure no water gets inside it. Use a mod-
erately damp cloth. Do not spray the
outside or the inside of the appliance
with water. If water gets inside the appli-
ance, it will cause damage.

Summary of Contents for Unimatic TL WP









































Reviews: