![background image](http://html.mh-extra.com/html/v-zug/unimatic-tl-wp/unimatic-tl-wp_operating-instructions-manual_846580029.webp)
8 Trouble-shooting
... in the display appears
Possible cause
Solution
▪
Pressing a programme button
several times while the child-
proof lock is activated.
▸ Hold the
button depressed and at the same
time press the required programme button. The
childproof lock has been overridden. The appli-
ance can now be operated without regard to the
childproof lock until the programme starts.
... in the display
…
and
flash alternately
Possible cause
Solution
▪
Various situations in the appli-
ance can lead to a «F» error
message.
▸ Cancel the error message by pressing the
but-
ton.
▸ Turn the power supply off for about 1 minute.
▸ Turn the power supply back on again and select a
programme.
▸ If the error appears again, note down the error
message in full and the serial number (FN) and
then turn off the power supply.
▸ Call Customer Services.
▸ Inform the caretaker, the owner of the appliance
or the property management company.
... in the display
and
flash alternately
Possible cause
Solution
▪
Overvoltage
▸ Cancel the error message by pressing the
but-
ton.
▸ Switch the power supply off for about 1 minute.
▸ Turn the power supply back on again and select a
programme.
If the error appears again:
▸ Disconnect the power supply.
▸ Have an electrician check the house installation.
If the error appears again:
▸ Note down the error message in full and the serial
number (FN) and then disconnect the power sup-
ply.
▸ Call Customer Services.
▸ Inform the caretaker, the owner of the appliance
or the property management company.
29