![background image](http://html.mh-extra.com/html/v-zug/unimatic-tl-wp/unimatic-tl-wp_operating-instructions-manual_846580026.webp)
7 Care and maintenance
▸ Clean the heat pump mat
3
, behind the
grille, carefully using a brush and va-
cuum cleaner with the crevice tool at-
tachment.
3
7.10
Cleaning the cooler filter
As required or with «A11»
▸ Push the handle back, open the filter
case and remove the cooler filter.
▸ Remove the fluff while dry, next rinse un-
der running water and then wring out.
▸ Wash on a 40 °C wash programme to
clean off heavier deposits.
▸ Insert the cooler filter. Ensure the cooler
filter is positioned correctly (cut-out, see
diagram).
The cooler filter does not have to be dry before being inserted in the filter case.
▸ Insert the filter case.
The filter case can only be pushed completely in if it is in the correct position.
26