V-ZUG GK21TG, Instruction Manual

Page: 11 / 20

11
Your new appliance
Page 2 shows an overall view of your new appliance as well as
the burner power.
These appliances can be combined with conventional hobs of
the same make, using the joint accessory. See the catalogue
for details.
Accessories
Depending on the model, the hob may include the following
accessories. These can also be acquired from the Technical
Assistance Service.
--------
The manufacturer accepts no liability if these accessories are
not used or are used incorrectly.
Gas burners
There are indications to show which burner each control knob
operates.
It is essential to ensure that all the burner parts and pan
supports are correctly installed for the appliance to work
correctly. Do not swap the burner caps around.
Switching on manually
1.
Press the chosen burner control knob and turn it
anticlockwise to the required setting.
2.
Use any type of lighter or flame (cigarette lighter, matches,
etc.) and bring it close to the burner.
Switching on automatically
If your hob can be switched on automatically (ignition
sparkers):
1.
Press the chosen burner control knob and turn it
anticlockwise to the maximum power setting.
While the control knob is still pressed down, sparks are
produced on all burners. The flame ignites.
2.
Release the control knob.
3.
Turn the control knob to the required setting.
If it does not come on, turn the control knob to the off setting
and repeat the steps above. This time, press and hold the
control knob for longer (up to 10 seconds).
:
Risk of deflagration!
If after 15 seconds the flame does not ignite, switch off the
burner and open a nearby window or door. Wait at least one
minute before trying to switch the burner back on.
Additional wok pan support
Only for use on double and
triple-flame wok burners with
pans which are more than
26 cm in diameter, grill pans,
earthenware casserole
dishes, large pans with a
round base, etc.
The additional wok pan sup-
port should be used to pro-
long the appliance's useful
life.