![background image](http://html1.mh-extra.com/html/v-zug/cooktopinduction-v6000/cooktopinduction-v6000_operating-instructions-manual_3195746014.webp)
4 Operation
Switching the bridging function off
▸ Touch both sliders at the same time.
–
Both cooking zones revert to the previous settings.
–
Each cooking zone can be regulated individually again.
4.11
Automatic boost
Do not leave the hob unattended when using the automatic boost. Risk of food
boiling over, burning on and igniting!
All the cooking zones are equipped with a selectable automatic boost. With this function,
a cooking zone heats at power level for a certain length of time (see table). Then it
automatically switches back to the power level set.
The automatic boost function must be activated anew each time a cooking zone is
switched on.
Power level
Automatic boost in mins.:secs.
0:40 01:15 02:00 03:00 04:15 07:15 02:00 03:15
If during the automatic boost a higher power level is selected, the duration will
change automatically.
Switching the automatic boost on
▸ Hold the required power level on the slider
depressed for 3 seconds.
–
and the power level illuminate alternately in the display when the automatic boost
is activated.
–
When the automatic boost is over, the heat output is reduced again to the power
level selected.
Switching the automatic boost off before time
▸ Use the slider
to set a lower power level.
4.12
Operating time
Do not leave the hob unattended during use. Risk of boiling over, burning on and
igniting!
With the operating time function, a Cooking zone switches off automatically after a set
time 1 min. – 1 hrs. 59 mins..
Setting the operating time
▸ Set the desired power level on the cooking zone.
▸ Touch the
button.
–
flashes in the display.
▸ Touch the slider
for the required cooking zone.
–
The
symbol for the cooking zone selected illuminates.
–
The display for the cooking zone selected illuminates.
▸ Use the
button to increase the operating time or use the
button to reduce the
operating time.
–
The first time the
button is touched, illuminates in the display.
–
The first time the
button is touched,
illuminates in the display.
The default value
can be adjusted in the user settings.
14