background image

5 OptiLink

▸ Touch the 

 button again.

A double acoustic signal is emitted.

The childproof lock is now switched off.

4.15 

Restore function

If the appliance has been inadvertently switched off with the   button, the settings that
were being used can be restored within 6 seconds. 
▸ Switch the appliance on.

The indicator light for the 

 button flashes for 5 seconds.

▸ While the indicator light is flashing, touch the 

 button.

4.16 

Pause cooking

After pause cooking, operation can be resumed using the previous settings. 
▸ Hold the 

 button depressed for 5 seconds.

The   display illuminates.

The power level of the cooking zone that is switched on changes to  .

The operating time is interrupted.

The timer continues to run.

All buttons are inactive except for   and 

.

▸ Touch the 

 button again to resume cooking.

If the pause cooking function is not turned off within 10 minutes, the appliance
switches off completely.

4.17 

Wipe protection

This function prevents the power level from being changed accidentally, for instance
when wiping the control panel with a cloth. 
▸ Touch the 

 button.

The indicator light for the 

 button illuminates.

▸ Wipe protection is switched off by pressing the 

 button again or automatically after

30 seconds.

Touch the   button to switch the appliance off at any time.

OptiLink

5.1 

Connecting the hob to the range hood

The hob can only be connected to a range hood with the OptiLink function. 

To activate the connecting mode on the hob:
▸ Switch the hob off.
▸ Access the user setting (see page 19).
▸ Select the 

 user setting.

▸ Select the   setting by touching or swiping slider 1; no further action is to be taken.

 and the   setting illuminate in the displays.

To activate the connecting mode on the range hood:

Make the settings as described in the operating instructions for the range hood.

17

Summary of Contents for CookTopInduction V6000





























Reviews: