![background image](http://html1.mh-extra.com/html/v-zug/cooktopinduction-v4000-cti4t64-series/cooktopinduction-v4000-cti4t64-series_installation-instructions-manual_3194872007.webp)
Installation instructions
CTI4T64/74
CookTopInduction V4000
Glass ceramic hob
1065985-R01
23/04/2019
1065985-R01
7
Installation with oversize mounting frame
The layout of the hob to be fitted may differ from the hob illustrated!
490–530
560–585
550/600
=
=
A
H
600
54
5
Ri
Ra
Y
Y
≥10
*
B
Y – Y
H
Drawer/cabinet
CTI4T64MMSLU, CTI4T64MMSOLU
Cable length 1.7 m
* The required clearance must be observed!
Type
A Depends on producer
B
H
Corner radius Ra/Ri
CTI4T64MMSLU, CTI4T64MMSOLU
≥20 mm
≥58.2 mm
48.2 mm
10/8 mm
A
Worktop depth (in combination with directly built-under oven; does not apply to small appliances)
B
Required clearance for ventilation and service replacement over the entire cut-out area.
H
Dimension from the top of the work surface to the underside of the hob (ventilation opening)
Ri
Corner radii of appliance
Ra
Outer corner radii of cut-out
The appliances with oversize frames can also be used as a replacement for solid plate hobs and for installation in complete chrome-
nickel steel covers. In the latter case, the solid plate hob part is cut out of the chrome-nickel steel cover and replaced by an appliance
(depth of the work surface ≥30 mm). In contrast to normal installation without a fastening system, the appliance is fixed from below us-
ing adjusting braces.