Installation instructions
CTI4T64/74
CookTopInduction V4000
Glass ceramic hob
1065985-R01
23/04/2019
1065985-R01
6
Flush installation
The layout of the hob to be fitted may differ from the hob illustrated!
507
±1
577
±1
≥41.5
≥41.5
A
550/60
0
571
50
1
Y
Y
X
X
Ri
Z
H
501
691
Y
Y
A
507±1
≥41.5
≥4
1.
5
550/600
Z
697±1
X
X
Ri
H
CTI4T64MMSLD,
CTI4T64MMSOLD
CTI4T74MMSLD,
CTI4T74MMSOLD
Cable length 1.7 m
Cable length 1.7 m
H
≥10
*
Y – Y
B
Drawer/cabinet
Side panel
B
H
≥10
*
X – X
550/600
C
D
Ra
R0–5
8.5
0
-1
8.5
0
-0.5
8.5
8.5
+1
0
+1
0
Detail Z
Steel angle mounted
with adhesive or screws
* The required clearance for ventilation must be observed!
Type
A Depends on producer
B
C/D
H
Corner radius Ra/Ri
CTI4T64MMSLD, CTI4T64MMSOLD
≥20 mm
≥75 mm
560/490
51.7 mm
5/1.5 mm
CTI4T74MMSLD, CTI4T74MMSOLD
680/490
A
Worktop depth (in combination with directly built-under oven; does not apply to small appliances)
B
Required clearance for ventilation and service replacement over the entire cut-out area.
H
Dimension from the top of the work surface to the underside of the hob (ventilation opening)
Ri
Corner radii of appliance
Ra
Outer corner radii of cut-out
Installation
1.
Create an accurate installation cut-out.
– The mounting surface can be reamed out or created by installing wood/stone supports or using the steel angle set (see Accessor-
ies).
Access to the appliance from below via the entire cut-out area must be guaranteed. For servicing purposes, the induction gen-
erator can be removed from below with the mounting plate. It must be possible to unscrew the contact-proof covers from be-
low.
2.
Prepare the cut-out and appliance in accordance with the specifications in the enclosed cementing-in instructions.
3.
Carefully cement the appliance in and leave the silicone sealant to dry for at least 24 hours.
4.
Connect to the electrical mains connection before inserting the appliance, if necessary.
