12 Trouble-shooting
Display
Possible cause
Solution
A11 Reached
maximum pro-
gramme dura-
tion
▪
Windows and doors
to the room were
open during the dry-
ing process.
▪
Moisture got into the
room during the dry-
ing process.
▸ Keep windows and doors to the room
closed during the drying process.
▪
An object or wall is
too close to the air
outlet of the tumble
dryer.
▸ Move the object or tumble dryer so that
there is a distance of at least 2 m
between the object or wall and the air
outlet of the tumble dryer.
▪
Front filter is clogged. ▸ Clean the front filter (see page 32).
▪
Front insert is defect-
ive.
▸ Open the air inlet flap.
▸ If it does not stay open on its own, call a
service technician.
▪
Moisture sensor for
the
room air dry-
ing operating mode is
defective.
▸ Call a service technician.
▪
A lot of wet washing
was hung up.
▪
During the drying pro-
cess, additional wash-
ing was hung up with
large time intervals in
between.
▸ For the next drying process, hang up
less washing.
Insert door fil-
ter / close appli-
ance door
▪
The door filter is
missing.
▪
The appliance door is
open.
▸ Insert door filter (ensure it is positioned
correctly).
▸ Close the appliance door.
▸ Restart the programme.
Insert front filter
▪
The front filter is not
inserted correctly.
▸ Insert the front filter correctly.
▸ Close the appliance door.
▸ Restart the programme.
For tumble dry-
ing, close both
flaps.
▪
The one flap is
closed; the other is
open.
▸ For the
tumble drying operating
mode, close both flaps (see page 17).
For room air
laundry drying,
open both flaps.
▪
The one flap is
closed; the other is
open.
▸ For the
room air drying operating
mode, open both flaps (see page 18).
35
