2
Initial set-up
The appliance must be installed and connected to the electricity supply in accord-
ance with the separate installation instructions. Have a qualified fitter/electrician
carry out the necessary work.
If the location of the appliance is changed, because of the heat pump it must stand
in its final position for around 2 hours before it can be operated again. Failure to
do this can result in damage to the appliance.
3
Appliance description
3.1
Construction
6
8
7
9
5
3
2
1
4
10
1
Appliance door
6
Front insert
2
Cover for door filter
7
Identification plate / serial number (SN)
3
Door filter with door filter mat
8
Front filter
4
Air outlet flap
9
Ventilation grille
5
Operating panel
10
Air inlet flap
10
