V-ZUG AdoraDish V6000, Operating Instructions Manual

Page: 18 / 60

4 Functions
Machine care Programme phases Consumption
values (without HP) Consumption
values (with HP)
The appliance and in
particular the storage
tank are rinsed hygienic-
ally clean. Clean the fil-
ter system before start-
ing the programme (see
page 46). Add dish-
washer cleaner as per
the manufacturer’s in-
structions. ▪ Cleaning: 70 °C
▪ Intermediate rins-
ing: 60 °C
▪ Rinsing with rinse
agent: 65 °C
▪ Drying
▪ 1h55
▪ 15–19 l
▪ 1.35 kWh
▪ 1h55
▪ 15–19 l
▪ 1.25 kWh
Pre-rinsing Programme phases Consumption
values (without HP) Consumption
values (with HP)
Prevents soiling drying
on if intending to start a
programme later. ▪ Pre-rinsing: cold ▪ 0h15
▪ 1–4 l
▪ 0.05 kWh
▪ 0h15
▪ 1–4 l
▪ 0.05 kWh
4.2 Setting options
Energy saving
For appliances without a heat pump: The wash temperature is reduced by 5 °C, lower-
ing energy consumption by approx. 10 %. The programme time is shortened slightly.
«Energy saving» is also gentle on glasses.
For appliances with a heat pump : Overall energy consumption is reduced by up to 30
%, however the programme time is extended.
SteamFinish
During final rinsing, steam is generated, which settles on the glasses and leads to op-
timum drying results. The programme takes about 15 minutes longer.
Partial load
For a small load of dishes. The amount of water used is reduced by up to 6 l and the
programme time is shortened by up to 36 minutes.
Delayed start
The delayed start allows you to wash during off-peak hours (e.g. at off-peak electricity
rates). A delayed start of between 30 minutes and 24 hours can be set.
OptiStart
OptiStart can be selected together with a delayed start (see page 41). During the
delayed start period, the dishes are soaked and this improves the cleaning results and
reduces the energy consumption.
18