10 Care and maintenance
10.3
Cleaning the filter system
Only use soft materials for cleaning beneath the filter system. Never use metal ob-
jects.
An incorrectly assembled filter system can cause the appliance to malfunction.
▸ Open the appliance door and pull out the lower bas-
ket.
1
2
3
▸ Release the filter system in fine filter
1
in an anti-
clockwise direction and remove.
▸ Open the coarse filter
2
by pressing on closing lug
3
and clean the filter system under running water using
a brush.
▸ Remove any coarse debris.
▸ Replace the filter system and turn the fine filter
1
as
far as it will go in a clockwise direction.
10.4
Refilling with regeneration salt
Never fill the salt reservoir with detergent!
When the supply of regeneration salt is exhausted, the
refill indicator flashes and the
following appears in the display:
Refill regeneration salt.
Then run the Pre-rinsing programme.
Lorem ipsum
Lorem ipsum
Lorem ipsum
▸ Open the box of regeneration salt.
▸ Open the appliance door and remove the lower basket.
▸ Open the cover
3
on the salt reservoir by lifting up the grip.
3
▸
For initial set-up only
: First add 1 l water.
▸ Fill with 1 kg standard regeneration salt.
▸ Wipe away any excess salt around the edge of the salt
reservoir.
▸ Close the cover
3
on the salt reservoir and engage the
latch.
▸ Run the «Pre-rinsing»
programme without dishes to pro-
tect the appliance from corrosion from any excess salt.
46
Summary of Contents for AdoraDish V6000
Page 4: ...4 15 Service Support 59 ...
