V-ZUG AdoraDish V6000, Operating Instructions Manual

Page: 42 / 60

9 User settings
Setting options Permanent selection Selection
Touch a setting option to assign it automatic-
ally to each programme (see page 37). The
«Energy saving»
and «SteamFinish» set-
ting options are not activated for the «Pre-rins-
ing» programme
.
▪ : Energy saving
▪ : SteamFinish
▪ : Partial load
▪ : Delayed start
▪ : RinsePlus
▪ DryPlus
Rinse agent dosage Selection
The rinse agent dosage is automatically ad-
justed to the load and the water hardness. If
the drying result is unsatisfactory, the dosage
can be set manually
to one of 12 levels.
The rinse agent dosage can be turned off .
▪ Automatic (factory setting)
▪ Level 1–12
▪ Off
Water hardness Selection
The unit of water hardness can be set to «°fH»
or «°dH» . The water hardness setting can be
changed to suit local conditions. Contact your
local water authority for the relevant informa-
tion. ▪ °fH: French degree of hardness
(factory setting: 26–30)
▪ °dH: German degree of hardness
Soft Medium Hard Very hard
°fH 0–
5
6–
10
11–
15
16–
20
21–
25
26–
30
31–
35
36–
40
41–
50
51–
60
61–
70
71–
80
81–
120
°dH 0–
3
4–
6
7–
9
10–
12
13–
14
15–
16
17–
19
20–
22
23–
27
28–
32
33–
38
39–
45
45–
65
Temperature unit Selection
The temperature unit can be displayed in «°C»
or «°F». ▪ °C: Degrees Celsius
▪ °F: Degrees Fahrenheit (factory set-
ting)
Interior illumination Selection
If the user setting is activated, from a certain
door opening angle the interior is illuminated
for the set duration. Five different durations are
available for selection. ▪ : Activated (factory setting: 10
minutes)
▪ : Deactivated
FunctionLight * Selection
The brightness of the illumination of the door
gap can be changed or deactivated using the
and buttons. Three different levels of
brightness are available for selection.
▪ : Activated (factory setting: Level
2)
▪ : Deactivated
* Depending on model
42