V-TUF VTS1210HPC XL, Operator'S Manual

Page: 7 / 38

7
When using the machine outdoors, do not use when it is raining
Do not attempt any kind of maintenance whilst the plug is connected to any sort of
power supply.
Take care not to spray the machine with the water jet as this could lead to short-circuit
Should you need to use an extension lead with the power supply, make sure that the
connection between the extension lead and the power lead is secure and stable and
conforms to standard safety norms. The plug and the socket should be waterproof.
Keep the machine out of reach of children or unauthorised personnel.
It is strictly forbidden for the user to operate the machine in any way in bare feet.
Do not use the machine if any of its components are defective.
Do not use the machine if there are people in your way.
Do not direct the water flow near sources of electricity.
Do not place your hands ahead of the lance; high pressure nozzles can be extremely
dangerous when used inappropriately.
If the machine should be used in service stations, supply stations or other potentially
dangerous locations, please ensure that the appropriate safety procedures are
observed.
Do not touch the engine, the chimney the boiler or other internal parts when the
machine is on, or immediately after it has been turned off as you may risk burning or
scalding.
Should you need to clean the engine, this procedure should be carried out in places
where, to safeguard the environment, an adequate oil separator is installed.
Re-filling of petrol should only be undertaken when the machine is turned off
Should you need to clean the motor, this procedure should be carried out in places
Do not use combustible materials other than those advised by the constructor.
Once you have finished working, and after the machine has stopped, release the
residual pressure in the tube and pump by squeezing the pistol lever.