background image

6

   Protect yourself against the ejection of solid materials or corrosive substances by means of 

   adequate protective clothing.

- The use of the H.P. cleaner must be considered according to the place where the washing is   

   performed (for example: food plants, pharmaceutical plants, etc.) Pertinent rules and safety 

   conditions must be followed.

- Do not direct water jets at your own or other people’s body in order to clean clothes or shoes.

- While working it is forbidden, to stop the trigger (lever) of the lance in delivery position.

- In the hot water H.P. cleaners a Diesel fuel burner is used for water heating. The use of other 

   fuels is dangerous.

- Before starting any cleaning or maintenan- ce operation, disconnect the machine from the eletric 

   and water supply networks.

- Periodically, at least once a year, have the safety devices checked by one of our service centres.

- The machine is for outdoor use. If the ap- pliance is to be used in an enclosed space (not advis

   able), install a flue gas extraction system and guarantee adequate ventilation.

- The hot water cleaner must be supervised while it is working.

- Do not clog the openings or the ventilation grilles and the heat and smoke extraction systems in 

   the hot water cleaners.

- Do not use the machine if the supply cable is damaged.

   For the replacement of the damaged cable apply exclusively to one of our technical service 

   centres.

   The supply cable of this appliance must not be replaced by the user.

- The electric power cable must never be under mechanical tension and must be protected against 

   accidental crushing.

- The use of any electric appliance requires the respect of some basic rules:

• Do not touch the appliance with wet or damp hands or feet.

• Do not use the appliance bare-footed or with unsuitable clothing.

• Do not pull the supply cable or the applian- ce itself in order to disconnect the plug from the 

   electric supply.

   (For water cleaners rated at less than 3 kW fitted with plug).

- In case of damage or malfunction, switch off the appliance (disconnecting it from the water main 

  and from the electricity main via the omnipolar switch or by unplugging the plug in the case of 

   water cleaners rated at less than 3 kW) without tampering with it.

   As for the protection against electric shock, the H.P.cleaner belongs to 

CLASS I.

Apply to one of our technical service centres.

Failure to observe the above warning frees the manufacturer from all respon- sibility and 

constitutes negligent use of the product

Summary of Contents for HD140HOT

















Reviews: