background image

10

    Danger

- The electric cable must be protected from accidental crushing.

- Do not use the machine if the supply cable is damaged.

- The use of any electric appliance requires the respect of some basic rules:

• Do not touch the appliance with wet or damp hands or feet.

• Do not use the appliance bare-footed or with unsuitable clothing.

• Do not pull the supply cable or the appliance itself in order to disconnect the plug from 

  the electric supply. (For water cleaners rated at less than 3 kW fitted with plug).

As for the protection against electric shock, the H.P.cleaner belongs to 

CLASS I.

Failure to observe the above warning frees the manufacturer from all responsibility and 

constitutes negligent use of the product.

USING THE CLEANER

CONTROL PANEL

- On/off switch

- Detergent control tap (if available).

STARTING THE CLEANER

1) Turn on the water supply tap (fig. 5A).

2) Connect the water cleaner to the mains electricity supply by plugging the plug into the socket.

3) Start the cleaner by turning the selector switch to pos. I (fig. 7A).

     Warning

The high pressure water jet generates a reaction force in the lance. Keep a firm grip on the lance    

handle.

4) Press the trigger on the gun and begin washing.

5) To operate the water cleaner with hot water, turn the ON/OFF switch to the Hot Water position. 

(fig. 7A).

     

Warning

In water cleaners with the “Total Stop” system, the motor starts and stops when the lever on the   

lance handle is actioned or released.

     

Danger

Do not block the handle lever in the delivery position.

IMPORTANT!

To eliminate any impurities or air bubbles from the water circuit we advise starting the cleaner for 

the first time without the lance and letting the water run out for a few seconds.

Impurities could block the nozzle and cause malfunction

(Fig. 8).

USING THE ACCESSORIES.

USING THE MULTIREG ADJUSTABLE NOZZLE (fig. 9)

Pressure must be selected with the gun switched off.

Low pressure washing and detergent suction. 

(Version with detergent suction).

FIG. 7

FIG. 8

Summary of Contents for HD140HOT

















Reviews: