Remove the 3 screws (21) keeping the washers, remove the mechanism unit
(20a);
Remove the jaw lock pin (16a), the 2 springs (16b) (see chapter 7 DISPOSAL,
page 30/32);
Lubricate the sliding surface of the jaw lock pin (16a) with a thin layer of grease;
Replace the lock pin (16a) and the springs (16b);
Fit the mechanism unit (20a) (see point 3 in chapter 5.2 REPLACEMENT OF THE
MECHANISM UNIT AND THE COUPLING PIN, page 22/32).
1)
2)
3)
4)
5)
5.8 REPLACEMENT OF THE JAW LOCK PIN
ATTENTION: Make sure that the drawbar coupling is closed, ie. the
coupling pin (14) is down.
16b
16a
REV. 00
CHAP. 5
PAG.
28/32
DRAWBAR COUPLING E 40
INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS
INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS
Summary of Contents for E 40
Page 32: ......
