![background image](http://html1.mh-extra.com/html/v-fit/al-16-1u/al-16-1u_assembly-and-user-manual_3073244015.webp)
Assembly & Adjustments
DRIVE BELT and FLYWHEEL ALIGNMENT
It may be necessary at some stage to adjust the Drive Belt on
your Magnetic Cycle. This can be achieved by removing
the 8 pre-fitted Machine Screws in the Chain Guards.
Loosen the Flywheel Spindle Nuts on both sides and adjust the two
10mm Alignment Bolt Nuts. Please take care to adjust each side equally
to ensure that the Flywheel is kept in alignment and that there is
approximately 10mm of FREEPLAY on the Drive Belt when correctly
adjusted.
10mm
Alignment Bolts
LUBRICATION and MAINTENANCE
The moving pa
HOW TO MOUNT and DISMOUNT
Hold the handlebar and stand on the foot platform. Start your training.
When you finish your workout, hold the handlebar and slow down your
speed. Once stopped, step off and onto the floor carefully.
rts in your Magnetic Cycle are all pre-lubricated
at assembly and should not require further attention.
We recommend however that the trainer is used inside and
stored in a dry condition. To clean the metal and plastic components,
a general household cleaner can be used, but please be sure to dry
the trainer and any attachments before use.
Page 15
Summary of Contents for AL-16/1U
Page 2: ......
Page 22: ...Assembly Page 22...