![background image](http://html1.mh-extra.com/html/v-fit/air-cycle-atc1/air-cycle-atc1_assembly-and-user-manual_3072904021.webp)
Assembly
6
7
Slide 2 x Pedal Bearings (32) and 2 x Pedal Bushs (20) onto both Pedal
Shafts of the Pedals (53) .
Warning: The Pedal Bush (20) must be between the Pedal Bearing (32)
and the Crank (28).
Fit the Pedals (53) into the Cranks (28) and tighten.
Hold each Pedal Shaft and thread 2 x Pedal Locknuts (33L/34R) onto each
Pedal Shaft. Tighten the pedal shafts and Pedal Locknuts (33L/34R) until
both Locknuts (33L/34R) are tight against the Crank (28).
Fit both Linkage Bars (3L&3R) onto the Pedal Bearings (32) and
secure in place using 2 x Pedal-Link Plate Lock Rings (31).
Now fit 1 x S19 Nut Cap (17) to each of the Pedal Locknuts (33L/34R).
One Pedal is supplied with a
RIGHT HAND THREAD for the
RIGHT HAND SIDE of the cycle
and must be fitted by turning
CLOCKWISE. The other Pedal is
supplied with a LEFT HAND
THREAD for the LEFT HAND SIDE
and must be fitted by turning
ANTI-CLOCKWISE.
Note
FULLY TIGHTEN all Bolts, Nuts
and Fittings now, ensuring that
your product in located on a
clear flat surface before doing so.
Your product will now be ready
to use.
17 34
28R 20
32
53R
17 34
28 20
32 53R
3R
32
31
Page 2
1
Summary of Contents for Air Cycle ATC1
Page 2: ......
Page 22: ...Assembly 4R 5 9 12 16 33 63 48 55 62 52 63 Page 22...