CUSTOMER NOTICE - EXERCISE MONITOR CABLE CONNECTION
In most cases where there is an apparent failure of your Exercise Monitor to work, it is due to
incorrect fitment of the Exercise Monitor cable connections. So, please ensure that there is
NO GAP between the connectors on the Exercise Monitor cables when finally assembled.
For
Jack Plug
fittings, push together the Male and Female ends to make initial contact. Push
again to make final connection. When fitted correctly, the Jack Plug faces touch each other.
For
2-Pin
fittings, ensure that you carefully line up the contacts in both of the
connectors and then push firmly together ensuring that the clips lock together.
Before contacting our Customer Support Team (see contact details below), please
re-check all cable connections, disconnecting and re-making where necessary.
Should you encounter any difficulty with the operation of your Exercise Monitor that is not
solved by re-connection, please return it to us at the address below for inspection.
WE REGRET THAT ARE UNABLE TO REPLACE ANY DAMAGED
OR FAULTY UNITS BEFORE INSPECTION BY US.
We reserve the right to repair or replace the Exercise Monitor at our discretion.
Beny Sports Co. UK Ltd.
Unit 8, Riparian Way, The Crossings, Cross Hills, West Yorkshire. BD20 7BW
Tel: - 01535 637711 Fax: - 01535 637722
e-mail: - [email protected]
CUSTOMER SUPPORT is open from 9.00am to 5.00pm from Monday to Friday
Exercising Information
In the interest of safety, do NOT
use polish or any lubricant on
the saddle or pedals
Caution
LUBRICATION and MAINTENANCE
The moving parts in your Air Cycle are all pre-lubricated at
assembly and should not require further attention. We recommend
however that the cycle is used inside and stored in a dry condition. To
clean the metal and plastic components, a general household cleaner
can be used, but please be sure to dry the cycle and any attachments
before use.
Page 16
Summary of Contents for Air Cycle ATC1
Page 2: ......
Page 22: ...Assembly 4R 5 9 12 16 33 63 48 55 62 52 63 Page 22...
