![background image](http://html1.mh-extra.com/html/v-fit/air-cycle-atc1/air-cycle-atc1_assembly-and-user-manual_3072904014.webp)
Exercising Information
RESISTANCE ADJUSTMENT
To ensure smooth efficient cycling action, it is essential that the
Tension Belt (57) is correctly adjusted. To adjust the belt, turn the
Tension Controller Knob (56) fully ANTI-CLOCKWISE and slightly
loosen the belt through the small bracket at the top of the Main Frame
(1) until minimal resistance is felt when the Fan Wheel (54) is rotated
by hand.
To INCREASE cycling resistance during use, gradually turn the Tension
Controller Knob CLOCKWISE to the desired setting.
In accordance with BS EN 957,
When you have finished your routine, turn the Tension Controller Knob
(56) fully ANTI-CLOCKWISE again to ensure that neither the Tension
Adjuster Cable or the Tension Belt are under tension when your
Air Cycle is not in use.
There will be a small amount of
built in resistance present at
first due to the general tight fit
of the new bearings, bushes
and chain.
Note
Note
the braking (resistance) system
on this cycle is speed
independent.
Note
The foot print for this product is
1060mm x 520mm.
1060mm
520mm
Page 14
Summary of Contents for Air Cycle ATC1
Page 2: ......
Page 22: ...Assembly 4R 5 9 12 16 33 63 48 55 62 52 63 Page 22...