d. To clear preset tare, press and hold
TARE
to enter preset tare setting, set all value to zero and
press
MODE
to confirm cancelling. Please make sure scale is not engaged in any kind of tare
before proceed to modify the preset tare value
5.3
MEMORY FUNCTION
How To Save A Weighing Result To Memory
a. Place a load on the platter and result will show on the display
b. Wait the Stable signal appears then press
M+
c. Weight result is now saved to memory and
M+
indicator appears indicating memory contains
data
d. Remove the load and scale will return to zero weight status
e. Put on another weight and press
M+
to save the next weight
NOTE:
Memory plus function can be temporary switch off if needed, particularly when the weighing result
does not need to be saved and requiring print out only. To disable memory plus function, press and
hold
M+
and display shows
ACC.on
, press
ZERO
to select between
ACC.on
and
ACC.oF
and press
MODE
to confirm.
How To Recall A Weighing Result From Memory
a. Press
MR
at anytime to recall the total result saved in memory,
MR
indicator appears indicating
the value shown on display is total result
b. Result will remain on display for a short while before return to the previous screen
How To Clear Weighing Result From Memory
Follow the below steps to clear saved data from memory after all transactions completed.
a. Press
MR
first to recall the total saved result from memory, the
MR
indicator will appear
b. Press
MC
immediately to clear the memory and
M+
indicator will off indicating there is no data
in the memory
5.4
PIECE COUNTING FUNCTION
This indicator equips with simple piece counting function, please follow the below procedure to
enable the function and sampling method.
a. Indicator is on and both Zero indicator and Stable indicator are on
b. Press
MODE
until display shows
PCS
as weighing unit on the display
c. Press
MR
and display shows
S: 10
, this means count 10pcs of the same item to put on platter for
sampling the average unit piece weight
d. If 10pcs is not needed, continue to press
ZERO
and display will show
S:20
,
S:50
,
S:100
,
S:200,
S:500 and S:1000
. When the ideal quantity is reached, press
MODE
to confirm and put the
sample quantity on platter
e. The display will return to normal weighing mode with PCS
indicator showing the scale is now in
piece counting mode.
f. Remove the load and put new batch, display will show the batch quantity.
g. If display shows a value while platter is empty, press
ZERO
to zero off the weight.
h. If new sampling is needed, press and hold
MR
to start new sampling by following step
c
to
d
.
NOTE
:
Summary of Contents for W75 Series
Page 21: ...DISPLAY SEGMENT DEFINITION ...
