7.10.1
Set Audio Alarm Output
If an audio alarm output is required,
enter function 30 and set appropriate
parameter. Refer to INTERNAL FUNCTIONS
for more information.
7.10.2 Setting Upper and lower Weight Limit
7.10.2.1
Set Upper Weight Limit
a. Press
MODE
until the desired weight
unit appears.
b. Press
HI/LO/SAMPLE.
c. The HI indicator appears.
d. Utilize
MODE
,
TARE
and O
N/ZERO
to
achieve required upper weight limit.
e. Press
SET
to confirm.
7.10.2.2Set Lower Weight Limit
a. Press
MODE
until the desired weight
unit appears.
b. Press
HI/LO/SAMPLE
twice.
c. The LO indicator appears.
d. Utilize
MODE
,
TARE
and
ON/ZERO
to
achieve required lower weight limit.
e. Press
SET
to confirm.
NOTE
: Change of function, (e.g. from
weighing mode to counting mode) or
turned scale off will not result in the
lost of weight limits set.
NOTE
: Weight Check will not function if a
weight unit, other than the weight unit
used to set the limits, is employed.
7.10.3Weight Check Transaction
Place a subject matter onto the platter.
The Weight Check result is displayed on
the display.
a. The HI indicator will appear when weight
detected exceeds the upper weight limit
preset.
b. The GO indicator will appear when weight
detected falls within the upper an d
lower weight limit.
c. The LO indicator will appear when
weight detected is below the lower
weight limit preset.
NOTE
: The scale will not display or generate
and comparison result/alarm if weight
detected is less than 40 d. Refer to
Appendix E for minimum weight required.
7.11
PERCENTAGE CHECK FUNCTION
7.11.1 Sampling
