Uvitron International INTELLI-RAY 600 Instruction Manual, Rev. T
Page 3 of 36
INTRODUCTION
1
1.1 Purpose of Manual
The purpose of this manual is to provide installation, operation and troubleshooting instructions
for the Uvitron International IntelliRay 600 Light Cure System. It is important the manual be read
carefully before any attempt is made to install and operate the equipment.
1.2 Purpose of Equipment
The system is a bench top, machine, fixture or conveyor mountable light source, designed for
the rapid light curing of photo-initiated adhesives, resins, coatings, inks or paints. The unit is
suitable for laboratory use or volume industrial production applications.
1.3 Unpacking
Visually inspect the shipping carton for physical damage. Damaged shipping cartons should be
reported to the carrier. Carefully open the carton and remove the equipment, being careful not to
lose or damage any separately packed parts.
Check all parts against the parts list. Any damaged or missing parts should be reported to the
carrier and to your UVITRON representative.
All packing material and the shipping carton should be saved in case the unit has to be returned
at some future time.
1.4 List of Included Parts
1. One (UV0832) INTELLIRAY 600 microprocessor-controlled
Lamp Head with integral
shutter.
2. One (UV0834) 600-Watt UVA enhanced metal halide lamp (installed).
3. One (UV2128) glass filter plate (installed).
4. One (UV0495) pair of UV protective glasses.
5. One (UV0883) AC power cord, USA standard (type delivered country dependent)
6. One (UV0841) IntelliRay 600
owner’s manual.
Optional Parts
1. One (UV1080) Rayven UV oven with adjustable shelf and DB15 interconnect cable.
2. One (UV0454) UV Flood Stand, consisting of post, base plate, & 2 screws with nuts.
3. One (UV0455) Wrap-around UV Flood Shield, Front.
4. One (UV1094) UV Flood Shield, Backside
5. One (UV0525) RS232 Remote Interface Cable.
6. One (UV0527) IntelliRay Remote Control Interface Software CD ROM.
