UTT Technologies
Appendix A FAQ
http://www.uttglobal.com Page 74
Figure Appendix- 2 Automatically Configuring TCP/IP with DHCP
4) Click
OK
in the
Internet Protocol Version 4 (TCP/IPv4)
dialogue, this will return you to the
Local Area Connection
Properties
dialogue. Click
OK
again. Till now you have finished
configuring the TCP/IP properties.
Q: How to reset the Device to factory default settings?
A:
When you remember the administrator password, you can go to the
Application
>
Configuration
page, and then click
OK
button to reset the Device to factory default settings.
If you forget the administrator password, you can use a pin to press and hold the
Reset
button for
more than 5 seconds when the device is on, and then release the button. After that, the Device will
restart with factory default settings.
Note:
The reset operation will clear all the custom settings on the Device, so do it with caution.