UTT Technologies Application
http://www.uttglobal.com Page 55
Figure 4-32 Time Setting
Current System Time:
Displays the current system date (YYYY-MM-DD) and time
(HH:MM:SS) of the Device.
Time Zone:
Select the correct time zone the Device resides. To ensure that the Device gets
the correct time from an SNTP server, you should select the correct time zone.
Set Time Manually:
Select to set the date and time (HH:MM:SS) for the Device manually.
Synchronize with SNTP Server:
Select to automatically synchronize the system clock from a
designated SNTP server on the Internet.
SNTP Server 1 IP Address
~
Server 3 IP Address:
You can configure up to three SNTP
servers on the Device. The Server 1 is the primary server (default is 192.43.244.18), and
Server 2 is the first backup server (default is 216.45.57.38), and the Server 3 is the second
backup server (default is 0.0.0.0). In most cases, we recommend that you do not change them.
Note:
For more information about SNTP, or to find an SNTP server with which you can synchronize the
system clock, please refer to
http://www.ntp.org
.
4.19 Remote Management
On the
Application > Remote Management
page, you can enable remote management, which
allows you to access the Device’s Web UI from anywhere over the Internet.